TRENDnet TEW-818DRU V1.0R AC1900 Dual Band Wireless Router
The TRENDnet TEW-818DRU V1.0R router has Gigabit WiFi, 4 N/A ETH-ports and 0 USB-ports.
It is also known as the TRENDnet AC1900 Dual Band Wireless Router.
Quick links:
Default password/Login
User Manuals
Table of Contents
- Router Specs
- Factory reset instructions
- Default settings
- Firmwares
- Similar routers
- User reviews
- Common questions
TEW-818DRU V1.0R router specifications
Cpu: 800 MHz
RAM: 128 MiB
Flash: 16 MiB
Custom firmwares: OpenWrt
WiFi: Gigabit (abgn+ac)
WiFi bands: 2.4GHz & 5GHz
WiFi throughput: n/a
WAN: 1 N/A port
ETH: 4 N/A ports
USB-ports: 0
Hard reset instructions for TRENDnet TEW-818DRU V1.0R
If your TEW-818DRU V1.0R router is not working as it should, dropping connections or not being
responsive, you should first do a reset of the router to see if the problems persist. Other
scenarios where you might want to reset your router is if you've forgotten the password or
misconfigured it and can't get access anymore.
Your can reset your TRENDnet TEW-818DRU V1.0R in the following way(s):
With the reset button
- Have the unit plugged in and powered on
- Press and hold the reset button for 15 seconds (use a sharp pencil or a paperclip)
- Wait for the router to reboot
The 30-30-30 reset
If the above instructions don't work you can always try the 30-30-30 reset as follows:- When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
- While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
- While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.
This process usually works for resetting any router to it's factory setting.
If that doesn't work be sure to check out the
questions and answers
incase someone else has had similar problems resetting their router.
Note: It is worth reading more about
how to reset routers with the 30 30 30 reset and what the risks and considerations are
when resetting your router this way, instead of just rebooting it.
Default factory settings for TRENDnet TEW-818DRU V1.0R
If you have performed a reset of your TEW-818DRU V1.0R device or not changed the defaults, you should be able to access it with the following settings:
Default password: ''randomly generated''
Default subnet mask: 255.255.255.0
Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.
TEW-818DRU V1.0R Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more secure
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider flashing
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly increase
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the TRENDnet TEW-818DRU V1.0R:
Flashing OpenWrt on the TRENDnet TEW-818DRU V1.0R
The TRENDnet TEW-818DRU V1.0R is supported by OpenWrt according to their Table of Hardware. So
flashing OpenWrt onto it should be quite straigthforward.
We couldn't find any specific instructions for flashin OpenWrt on the TRENDnet
TEW-818DRU V1.0R, but since it's listed in their Table of Hardware as supported, you can head
over to the
OpenWrt install instructions
and read on there.
Note: Flashing custom firmwares is always on you're on own risk. Make sure to
read OpenWrt's wikis to understand the risks and how to proceed if something goes wrong.
TRENDnet stock firmware for the TEW-818DRU V1.0R
Stock firmwares for the TEW-818DRU V1.0R are available under the download section on the modem's support page. You can also refer to the router's manual for instructions on how to upgrade the firmware.
Similar routers
Report error on page
(If info is incorrect)