DiskStation DS413

Name: DiskStation DS413
Brand: Synology
Rating: 37 (3 reviews)

Thumbnail for the Synology DiskStation DS413 router with No WiFi, 1 Gigabit ETH-ports and
0 USB-ports

The Synology DiskStation DS413 router has No WiFi, 1 Gigabit ETH-ports and 0 USB-ports.

Quick links:
Default password/Login

DiskStation DS413 router specifications (specs)

System specs
CPU: 1 GHz
RAM: 1024 MiB
Flash: 4 MiB
Custom firmwares: None

Connectivity
WiFi: No ()
WiFi bands: n/a
WiFi throughput: n/a
WAN: None
ETH: 1 x Gigabit port
USB-ports: 0

Synology DiskStation review (quick overview)

Here is the quick comparison of how the Synology DiskStation compares to other routers on our site:

Average 37/100

Editor 60/100

WiFi 2/100

Hardware 50/100

Current price Find best price

For a full list of routers and how they compare to the DiskStation DS413, check the Router Buying Guide which will help you buy the most price-competitive router.

Hard reset instructions for Synology DiskStation DS413

If your DiskStation DS413 router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.
Your can reset your Synology DiskStation DS413 in the following way(s):

The 30-30-30 reset

There are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:

When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds
While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the questions and answers incase someone else has had similar problems resetting their router.

Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it.

Default factory settings for Synology DiskStation DS413

If you have performed a reset of your DiskStation DS413 device or not changed the defaults, you should be able to access it with the following settings:

Default subnet mask: 255.255.255.0

Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network.

DiskStation DS413 Firmwares

Staying up to date with the latest firmware is a good idea to keep your router even more secure from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider flashing an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly increase the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Synology DiskStation DS413:

Synology stock firmware for the DiskStation DS413

Stock firmwares for the DiskStation DS413 are available under the download section on the modem's support page. You can also refer to the router's manual for instructions on how to upgrade the firmware.